|
AGS400 Automatic Sawing Centre
Description:
The Kombimatec AGS400 Automatic Cutting Saw Centre is a fast automatic saw for producing
cut pieces from full lengths of 6.0m PVCu profile with little skill. The machine
will produce ninety degree, forty-five degree and arrowhead cuts with a high
degree of accuracy.
Features and Functionality:
Kombimatec AGS400 Sawing Centre for uPVC window & door fabrication: The fully
automatic Kombimatec Sawing Centre is capable of cutting mitres, squares and
arrow heads on any PVCu door and window profile, in any combination. The machine
can be programmed directly from the keyboard with the user friendly operating
interface, or programmed off-line via a 3.5” disk/USB port or network linked to
the office window designing package. It comes complete with a 15 bar capacity
auto loading table for 5 to 6.5 metre profile lengths and shorter offcut
lengths. The material is advanced with a simple pusher arm, common for all
profiles. This allows the machine to cut to the very ends of the bar, minimising
wastage to just the unavoidable saw blade kerf. The two flat, parallel sides of
the profile are the cutting datum, so an infinite range of profile types, brands
and sizes can be accommodated without having to change the machine
configuration. The machine is designed to be simple to use for unskilled
operators - training takes less than four hours.
Capacity
6.0m Infeed. Minimum profile height: 58mm Maximum profile height: 140mm Minimum
profile width: 45mm Maximum profile width: 125mm Infeed table capacity: 15 bars
at 75mm wide Minimum cut length: 285mm Maximum cut length: 2800 - 5980mm
(Dependent on machine location)
Standard Equipment
Infeed Table 15 bar capacity
Outfeed Table
TCT Sawblade
USB Port Automatic
Self-Centering for Arrow Cutting
Optional Accessories
Label Printer
Swarf Extractor
Off-Cut Conveyor
Ethernet
Office software and link for cutting list
Technical Data
Power supply: 415volt, 3~, plus earth and neutral, 50Hz, Load 15amp
Compressed air supply min 6 bar , 22 litres per second
AGS400 Saw Footprint - Left to
Right - PDF
AGS400 Saw Footprint - Right to
Left - PDF
Performance
At 100% efficiency, average output is one piece every 8-10 seconds.
For the average frame, the output will be 850 windows per week.
''For more information, a leaflet for this machine and access machine video content, please submit your details on the Contact Form , thank you' | 
