Machinery for Fabricating PVC and Aluminium Windows and Doors - Since 1984DGS560
Home About Us PVC Machinery Aluminium Machinery Refurb Kombimatec Tools & Cons Technical News Contact Us Recruitment


DGS560 Electronic Double Mitre Saw
for Aluminium and Vinyl/PVC Profiles 

DGS560 Electronic Double Mitre Saw, c/w large cutting capacity- NEW

The DGS560 comes equipped with an Industrial HMI for easy access to the software.  The interface is extremely user friendly enabling operators with limited cnc knowledge to understand and operate safely.
The control system has a USB port for uploading and downloading sequential cutting lists created by the operator.  This can also be used for program updates if required.

Roller Support on the Moving Head
Reduced Cut Facility
Trim Cutting facility for cleat cuts.
Mist Spray devices for cutting lubricant.
Barcode Label Printer

Technical Data:
Right Head Movement: Motor/Manual
Max. Cutting Length/mm: 4000-5000
Tct Blade/Diam.: 500-530
Bore/Diam.: 30
Tilting /: 90 / -45
Head Tilting: Pneumatic
Operating Pressure: 7 Bar
Air Consumption: 65/120 Lt/Cycle
Motor Power: 2.2 Kw
Voltage: 400 V. - 50 Hz
Rpm: 2800
Minimum Cut At 90: 370 mm
Minimum Cut At -45/90 R-L: 370 mm
Min. Cut -45/-45: 370 mm

Email sales enquiries to
Privacy Policy Download Kombimatec Privacy Policy May 2018.pdf
Copyright 2018 Kombimatec Machines Ltd.