skip to main content

PVC & Aluminium window manufacturing machines

CALL US 01582 562218

2HD1V/140 Twin Corner and Transom Welder

For Vinyl/PVC Profiles


2HD1V/140 Twin Corner & Combination Head Welder, for corner, transom & cruciform joints, max. profile width 150 mm, max. profile height 140 mm, variable angle 30-180°, max. welding length 2750 mm, 2.0 mm weld bead limitation, solid steel construction, overhead safety clamping, overhead heater plate.


All combination heads designed to produce corner, transom and cruciform joints in window and door profiles. Adapts quickly and easily without the need of tools. Rear fences line up automatically due to chassis linked permanent stop avoid gathering the heads together for re-alignment and eliminating the need of a straight edge setting device. Utilises support blocks with magnets and special shouldered setting screws to allow quick removal and refitting. No time consuming hand wheel adjustments. All movements are made with smooth linear bearings and hardened steel shafts. Automatic head movement locates the profile providing consistency, speed and ease of loading. Avoiding possible irregular contact of profile to setting plate of a hand positioned head. Spring-free heater plate float removes bias melt to one side. A small miniature cylinder centralises the heater plate when necessary. Small footprint only 3.0 m long. Ideal for small sashes and transom drops down to 325 mm. Fast operating cycle due to solid wide setting plate eliminating the initial table movements completely saving time. Designed to be easy to use and simple to maintain. Safety clamp, two-hand control and full compliance with CE regulations.

Other versions available including Single, Three and Four Head machines.

Technical Data:

  • Type 2HD1V, 2HDV
  • Mains voltage 400 V, 3~, 50 Hz Mains fuse 3x16 A
  • Power output per head 2 kW
  • Compressed air connection 7 bar Air consumption per head 40 ltr per welding cycle
  • Weld bead limiters 2,0 mm 6,0 mm Burn-off
  • Temperature of heater plate 200-300C
  • Dimensions (Length, width, height) 3000x900x2100 mm
  • Weight 600 kg

Standard accessories:

  • Set of support arms
  • Teflon cover for heater plate
  • Air service unit
  • Instruction manual

Optional accessories:

  • Tool shelf
  • Variable angle fence
  • Weld bead limiters 0,2 mm
  • Burn-off 5,0 mm
  • Teflon Cover for heater plate
  • Outer contour limiters (to suit profile)

You may be interested in

Please contact sales for further information.

UK Sales: 01582 562218

Overseas: +44 1582 562218