EV443/CNC Corner Cleaner
For Vinyl/PVC Profiles
Description:
EV443 CNC Corner Cleaner: With 3,0mm groove knives (2-off) Frame support table (1-off) TCT Milling Blade Air service unit Serial cable Programming and connectivity software (CD) Instruction manual (CD)
Features and benefits
- Automatically grooves both top and bottom profile faces and mills outside edge in one operating cycle
- Wide range of outside shaped profiles can be cleaned due to CNC controlled milling blade.
- Up to 25 different program slots available
- Programs created on desktop or laptop computer
- Programs transmitted to machine memory via serial cable from computer
- Simple to program, uses standard EXCEL to create programs
- Digital display allows for 'tweaking' of the programs for optimum finish
- Full interpolation enable decorative shapes to be milled
- Milling blade provides a superior finish due to more teeth and a higher periphery speed, when compared to conventional cutter sets
- Total flexibility with full operation or option to isolate either or both groove knives or milling blade
- Single side grooving selection for non-white or foiled profiles
- Cleaning cycle activated automatically as frame joint is inserted
- Small footprint - measures only 86 cm x 98 cm excluding frame support table
Technical Data
- Milling blade 250 mm dia. 5mm thick, 25mm bore
- Knife 3,0mm
- Mains voltage 3~, 400-440v, 50Hz
- Milling spindle 2800 rpm
- Power output 0,55kw
- Compressed air supply 5 bar minimum
- Air consumption 15 ltr per second
- Dimensions excluding frame support table 980 x 860 x 1545 mm
- Weight 420 Kg
Click below to watch demonstration video: